Profilux Plus II - FW 1.07 - Controller

[Rubends]

Hi,

I have a profilux Plus II with FW 1.07. Which controller (software) can I use to connect to that device? I would like to upgrade it to the latest FW version, but at the moment i'm unable to connect to the device...

Thanks in advance
Ruben

[AjakAndi]

Hi Ruben ...

.. .. that was really a long time ago !! .. you can use ProfiLux Control (PLC) version 1.05 for this !!

1.JPG

LG

ANDI

[Rubends]

Hi Ruben ...

.. .. that was really a long time ago !! .. you can use ProfiLux Control (PLC) version 1.05 for this !!

1.JPG

LG

ANDI

Thanks for that information,

can you also provide me with a link where I can find that version on the website https://www.aquariumcomputer.com/downloads/

I recently bought a 2nd hand aquarium (Juwel Rio 300), and I found that profilux in a box
So I would like to re-use it.

Though, I also still miss the ProfiLuxSer cable, which was not in the BOX... i'm trying with other RS232 cables I have laying around, but untill now no success



Thanks!

[AjakAndi]

Hi Ruben,

an you also provide me with a link where I can find that version on the website

this very old version is no longer available on GHL aquarium computers! .. too old!!

.. I could send you the ProfiLuxControl V1052 version, but I would need an e-mail address! The version should work, if this is not the case, you will have to report again.

MfG

ANDI

[Rubends]

Hi AjakAndi,

I sended you a private message with my email.
Thanks for the help.

ps: If i'm able to connect to the device, can i do a direct upgrade from version 1.07 to 5.17?

[AjakAndi]

Hi Ruben,

I hope that you will get access to your ProciLux II with this version / software !!
If not, then get in touch again and we'll see what we can do !!

LG

ANDI

[Rubends]

Hi Ruben,

I hope that you will get access to your ProciLux II with this version / software !!
If not, then get in touch again and we'll see what we can do !!

LG

ANDI

ghl.png

doesn't seem to work...

[AjakAndi]

doesn't seem to work...

I'll send you the previous version V1049 .. If that doesn't work either, you have to flash your ProfiLux II ....
The problem can also be that your Windows version is too current and ProfiLuxControl is not running on your PC!
Then we have a problem ...


ANDI

[Rubends]

I'll send you the previous version V1049 .. If that doesn't work either, you have to flash your ProfiLux II ....
The problem can also be that your Windows version is too current and ProfiLuxControl is not running on your PC!
Then we have a problem ...


ANDI

I guess there is a risk of flashing the Profilux II? and how to do that ?

all the versions of Profiluxcontrol that I installed seem to work on my computer though... Windows 10 64bit.

[AjakAndi]

..

LINK

.. maybe you should try to flash your PL II ...

ANDi