Yes you can connect a PAB bar and a 6D bar and have them operate correctly combined. (My setup is like this)
And Yes installing the Doser is exactly as you describe.
Set up the 6D bar OR the Doser first. If you start with the doser assign the switch numbers you want to use and then do the 6D power bar next. These have to be done separately.
Then setup the PAB power bar with the PAB assignment and set up the switch numbers on that.
Yes, for the PAB cable a Ethernet patch cable cat5e would be perfect.
For the doser and 6D power bar, I think you need a six wire cable with RJ25 plugs. Most phone cables are only RJ 11 (2 wire) or RJ14 (4 wire)
Call me Paul !
Note: I am not GHL staff!
Bookmarks