Results 1 to 9 of 9

Thread: Powerbar 6D-PAB and STDL4-4D

  1. #1
    Join Date
    30.05.2011
    Posts
    65

    Default Powerbar 6D-PAB and STDL4-4D

    I have Powerbar 6D-PAB & dosing connected to my plc3 with switch assignment from S1-6 & S7-10. Today i have added new PB STDL4-4D, and try to reassign pb from S1-6 to S15-20, but fail to reassign, can someone help in this issue ?

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    In which way do you connect the devices?
    I assume you did it in this way:
    Powerbar6D-PAB at port PAB
    Dosing Unit at port S1-4
    STDL4-4D at port S5-8

    The STDL4-4D is a conventional powerbar and can't be programmed. The STDL4-4D reacts on S1..S4 at the S1-S8 port and on S5..S8 at the S5-S8 port.

  3. #3
    Join Date
    30.05.2011
    Posts
    65

    Default

    Quote Originally Posted by Frank View Post
    In which way do you connect the devices?
    I assume you did it in this way:
    Powerbar6D-PAB at port PAB
    Dosing Unit at port S1-4
    STDL4-4D at port S5-8

    The STDL4-4D is a conventional powerbar and can't be programmed. The STDL4-4D reacts on S1..S4 at the S1-S8 port and on S5..S8 at the S5-S8 port.
    Thx, i hv to reassign 6d to another switch port to free up s1-s6, but found not able to reassign, not sure what is the issue?

  4. #4
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    I don't understand your question.

    Do you have a Powerbar6D or a Powerbar6D-PAB?

  5. #5
    Join Date
    30.05.2011
    Posts
    65

    Default

    Quote Originally Posted by Frank View Post
    I don't understand your question.

    Do you have a Powerbar6D or a Powerbar6D-PAB?
    Powerbar6d-pab not able to reassign

  6. #6
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Did you assigned the PAB-Powerbar to the ProfiLux according the manual?

    Then you should be able to assign a new start number at the ProfiLux menu (not PLC):
    ProfiLux -> System -> Configure PAB -> Configu. device -> PB ######## -> Set numbering
    where #### is the serial number of your Powerbar6D-PAB

  7. #7
    Join Date
    07.06.2009
    Posts
    738

    Default

    Quote Originally Posted by Frank View Post
    Did you assigned the PAB-Powerbar to the ProfiLux according the manual?

    Then you should be able to assign a new start number at the ProfiLux menu (not PLC):
    ProfiLux -> System -> Configure PAB -> Configu. device -> PB ######## -> Set numbering
    where #### is the serial number of your Powerbar6D-PAB
    in the configu. device => you need to add the X in the square by pressing the => key on the profilux

    alot of persons forget to place the x

  8. #8
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    Quote Originally Posted by Blahenazo View Post
    in the configu. device => you need to add the X in the square by pressing the => key on the profilux

    alot of persons forget to place the x
    This is during "assign devices", not at "configu. device"

  9. #9
    Join Date
    07.06.2009
    Posts
    738

    Default

    Quote Originally Posted by Frank View Post
    This is during "assign devices", not at "configu. device"
    oops idd sry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •