Quote Originally Posted by nebojsar View Post
I have problem with profilux 3.1 Ex. It hangs during communication both USB or LAN, simply app shows that is connected and few seconds later connection breaks. In firmware field is written 1.0000 and serial is 0.
Device itself works and display shows firmware 5.15. I wanted to update firmware but I could not find any newer version or downloads page ?! I've opened device, put jumper short, installed flasher but I could not find
some new flash.

When I connect device to usb it takes usb port, when on lan takes web address but I cannot access to it. Any idea how to solve this?
I had working unit with firmware 5.15 and now I don't have working unit at all. I've used steps from start of this thread, installed flash tool, had RS232/USB adapter, adapter was able to read from COM1, used firmware
6.31 for procedure from latest control center, pressed button to start procedure and than added power, Procedure started - After erase procedure, when write procedure start device several times reported error 13 and
ceased procedure. I tried few times, it started again, erase, and than write and procedure failed. Now I don't have display live and complete device seems dead. Is there any chance how I can save it?