When you connect a LAN cable to the ProfiLux 3 for the first time, you should connect via USB and go to the system settings page. At the bottom of that page, there is a section that says Current IP address. What is written there is the IP address of your ProfiLux. that is assuming you still have it's LAN settings still set to automatically have an IP address assigned.

1. Write down this IP address and disconnect from the USB ProfiLux connection.
2. Create a new connection in GHL Control Center by clicking on Administrator on the upper left side of the screen
3. Click New and select the ProfiLux 3
4. Name this connection
5. Set the type of connection to Network (TCP/IP)
6. Check or uncheck the Search automatically box
a. If you set this connection to Search automatically, you do not need to type in the IP address of the controller.
b. If you uncheck the box, you will have to type in the IP address of the ProfiLux.
7. Click Save.


Once completed, select this new connection and connect.