Kessil A360

[swezoo]

Yes, you need one LBF-AP and also one stereo 3.5 plug. I used this one (http://www.clasohlson.com/uk/Exibel-...le/Pr327701000), but I'm sure you can find similar in a lot of different electronic stores. I'm also sure you can buy the original cable from Kessil, but it is much more expensive (you still need to cut it).

1. Cut of the cable to desired length (remove the RCA connectors)
2. Make sure you know what part of the plug is connected to which cable (you should have 4 cables when you remove the RCA connectors)
3. Screw them on the the board (in the order below)

Tip to pin 1
Sleeve to pin 2
Ring to pin 3
Sleeve to pin 4

images.jpeg

With the above items you will be able to control both color and intensity.