Profilux 3.1N ex Output port (L1L2) current

[vinoth.1985]

Hello

I am trying to connect 6 singleLED (each has power-3W, current max: 700mA). I would like to connect this to the Profilux 3.1N ex for controlling the illumination. I would like to kindly ask whats the output current from each port (L1L2) in the profilux. Can you kindly tell me in terms of watts.

Thanks.

[Gunther]

Can you kindly tell me in terms of watts.

There is no power output you can use from L1L2, it is signal only. To drive your LEDs you need a dedicated LED driver. To dim the LEDs, it has to be able to work with 1-10V signal. In any case you need an external power supply.

Have in mind: 6x 3Watts are 18 watt which mean 1,5 ampere at 12 volt.