Results 1 to 10 of 18

Thread: Unable to connect to dosing pump via wifi

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    21.01.2015
    Posts
    17

    Default

    Ok , will try this . Thanks

  2. #2
    Join Date
    21.01.2015
    Posts
    17

    Default

    Hi,

    I tried this and it still does not connect bia the software . I connected it to an ethernet cable setup the lan and tried it again it connects but after browsing a few of the pump pages it freezes ( the software) with an error code 50. I have to restart the doserand software again before it can reconnect but then i gettue same problem. Software freezes. Error code 50 .

    Thanks

  3. #3
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Can you install the latest GHL Control Center and send me an error report.
    If the error code 50 appears GHL Control Center should ask you to send a report.
    Enter your e-mail address and write error code 50 in the description.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Join Date
    21.02.2015
    Posts
    6

    Default

    I have the same issue. cannot connect via wi-fi. Using latest firmware and drivers, set the system to connect to my router and the GHL control centre just will not connect to the doser.

    Difficult to connect via lan due to the distance and leaves a cable about 20ft across my living room.

    The smartphone app just loses connection 3 seconds after you select anything and crashes continuously.

    Can only connect via USB, which I don't really want to do.

    Whole reason for buying is for the wi-fi connectivity.

    This need a very clear step by step instruction with screen shots on how to actually set this up as the manual stops short of showing how to actually connect via wi-fi.

  5. #5
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Hello,

    the actual manual have a step by step, you can download the actual manual here: http://downloads.aquariumcomputer.co...php?fileID=218
    Here is a post (#7) with step by step instructions: http://forum.aquariumcomputer.com/sh...ighlight=Doser

    If you wish i can help you remotly, write me a PM.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    21.02.2015
    Posts
    6

    Default

    Hi. managed to connect via wi-fi. It is very slow and unstable connection. I managed to connect into the device itself and suspect that the wi-fi UART may be the issue. I think it just keeps dropping the connection.
    software wise I normally receive the error 50 or error 60 message and the software then terminates. The app is just too unstable to be useable as it teeminates after approximately 30 seconds .

  7. #7
    Join Date
    13.11.2013
    Posts
    1,001

    Default

    Hello,
    thank you for your response.
    We will release a new firmware and an updated Android App today.
    This should improve the wifi connection.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •