Hello

I'm not sure where to post this, so if anyone can redirect it I'll be grateful.

I have a new Profilux 3.1nEx with two power bars and a slave doser. I've assigned the two power bars by going into the system menu, configure PAB, assign device & checked the two PB numbers. I have a PAB cable connected from the P3 to the first power bar and a PAB cable connecting the first PAB cable to the second.

Then I connect my macbook to the profilux via the Profilux control download. In the socket function page I assign the switches accordingly. Here lay the problem:

I have a reactor plugged into the first socket ( socket 1 ). This should be on 24/7 so I opted for the " always on " tab and save it. It turns on the reactor but it also turns on the 1st pump on the slave doser. Its the same when I assign socket 2, socket 3 and socket 4 ... they turn on the equipment AND the corresponding pump on the slave doser.

I'd really appreciate some help on this ..

Thanks

Rob