SMS issues

[reef]

Mine seems to work,
I got a trigger on level 3 and the sms had a level 3 alert,
When it cleared it showed .Level:

So maybe you should redo the firmware. i am using sms firmware 3.03.

Matthias,

The SMS shows what level is alarmed which is great, so when will a sms update be available so that it will also show when sensor is alarmed, as all it says for other sensors is Alarm?, as it can do it for level sensors then it should be able to do it for others.

[doggydoc10]

Still waiting for answers from GHL. I did redo install of new FW but prob still persists.



Doggydoc

[mdanielse]

I have the same problem with the e-mail alarm, With the new firmware you get a alarm e-mail when a "levelcircuit goes bad" but there is no indication which levelcontrolcircuit triggers the alarm, not really handy...... In the old firmware there was a indicator behind the level control circuit which triggered the alarm. (See screen shots from e-mail with old and new firmware).

"Level 1 - off, Level - 3 off"..?????.....this does not give me the information on which levelcircuit is the trigger for the alarm
I know that Level 1(and 2) Are the levelcontrolcircuit in my filtercompartment, and level 3 is the one which does make sure that my aqaurium tank does not overflow. Would be nice to know which of the two levelcontrolcircuits is the trigger for the alarm.

Please make the alarm messages back to the way the where.

LEVEL ALARM E-MAIL NEW FIRMWARE
e-mail_alarm_level_firmware_new.jpg

LEVEL ALARM E-MAIL OLD FIRMWARE
e-mail_alarm_level_firmware_old.jpg

Profilux knows which levelcontrolcircuit is the trigger for the alarm, so put it in the Alarm E-mail, like in the old days
level_settings.jpg

[reef]

I have the same problem with the e-mail alarm,

I also have the issue with level alarm in email. all it says is alarm level, does not say which level is alarmed,

Also today i got a sms alarm, but it never told me which level is triggered,


Seems there are issues.

[Matthias]

I checked my system and it seems it works as it should, we must find now the differences.

The first thing is that you should be able to show the level sensor states on the ProfiLux screen. It is really weird that you don't see them.

Please do these display-settings:

DisplaySettings.jpg

with these settings I can see on my display this:

1.
Level3456.PNG
all sensors (1-6) contact to water

2.
Level123456.PNG
senors 1 + 2 no contact to water

please let us first have this state in your system before we continue
as long as you can't see this it is not sure that the settings, hardware setup or the firmware version are as expected

[doggydoc10]

Ok here are my screens.

Currently I CANNOT SEE NUMBERS ON MY SCREEN like you have posted.







Thanks for the help Mathias.

As far as connection, let me state that I have one level sensor input split into two coming from my P3. And another one from an EXP box also split into two.
So total 4 sensors. But NONE OF THEM ARE SHOWING IN SCREEN




Doggydoc

[doggydoc10]

Just realized something.
If I invert sensors like it shows here:

I DO SEE sensors
In display and I got SMS with the corresponding level showing.






My issue is that MY SENSORS ARE ALL LEAKAGE SENSORS....if I don't invert them they won't work the way I want to. Can I achieve the function i
I am looking for and at the same time have SMS show levels that are triggered?

Any input?




Doggydoc

[doggydoc10]

Here is the SMS showing sensor 2 as alarm.





Doggydoc

[doggydoc10]

If I use RETURN PUMP. WIll that make a diff?




Doggydoc

[reef]

On the profilux display it only shows 7. so i assume this is level 7.

On the level sensor display it only shows level sensor 7 with X.
However level sensor 7 is disabled.

so unsure why the other sensors do not show.