Quote Originally Posted by plankton99 View Post
Any progress on this. I would like to control dimmable buckpucks...
I've got the buckpucks to work fine with a bit of adjustment:

1) I adjusted the 10v Profilux control to a maximum voltage of 6v (wouldn't go any lower despite the specs saying the minimum was 4.5v - not sure if there is something I've missed here). I set the minimum voltage at 0v.
2) When setting the dimming/timing make sure you don't exceed a maximum lighting of 80% . This ensures the control voltage to the buckpuck never exceeds 5v.
3) As the control voltage for the Buckpucks work in reverse (off is 5v, full power is 0v) you need to work in reverse - set the Profilux to show 80% lighting when you want the lights to be off, and 0% when the lights are to be on full power.

Not perfect, but it works. I have 4 LED lighting channels (white, blue, red & orange) that I've been able to mix to create different scenes from sunrise, full sun, sunset, and moonlight - white, blue.

However, if I was to do it over again I'd definitely go with the Mean Wells for simplicity and a greater range of control.