Wirus answers were perfect! I have nothing to add.
Wirus answers were perfect! I have nothing to add.
No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.
Thanks Matthias .
Can not make conneciton with PII to PC.
PII Verison: 5.0.5F
PLC Version: 5.0.5.3
I have done below procedure in PII.
System -> Commucaiton -> COM2 LAN -> Device Adress(1) -> 9600 Baud -> IP Adress -> Obtain IP Auto(NO) -> IP Adress 192.168.000.070 -> Yes -> Reset Module
Later I do the below adjustments in PLC. So where do I make mistake? Can you help me?
Windows 7 right? Perhaps the windows firewall blocks the communication of PLC...
Thanks your replay Frank. My notebook operation system Windows XP Pro, same show Windows 7.I can not connect PC to PII.
Very Urgently your help.
B.R.
If you are using static IP you should set up PLC accordingly
means: Host-Name to 192.178.0.70 in your case
Please help me.I can not ethernet connection. Some people writing how the connection step by step.
Thanks.
Anybody hear me.....
Hi ebaygul,
do not change the LAN settings in PLC .... it will spawn an error 28
configure your LAN parameters on your PL console or via http://your.plc.ip.number
http-access.jpg
Haven't looked around for much more info on the http access to PL2 I'm running, but looks to me like some parameters (e.g. comms) can be set. There is also an email trigger section, but then again, it looks NOT straight forward to configure and I'm not using it, I use PLC to send emails
Treat the LAN settings in PLC as "read only", despite the fact that mine also shows " Obtain IP automatically", I am using a static IP.
cheers
Jurgen
I've seen your computer's IP is 192.168.1.100, then assign to your ProfiLux 192.168.1.70 not 192.168.0.70.
Assign IP in the same range 192.168.1.xxx
GHL Iberia
Bookmarks