Results 1 to 2 of 2

Thread: Can't connect to Profilux 4 after 5.02 FW upgrade

  1. #1
    Join Date
    22.04.2024
    Posts
    1

    Default Can't connect to Profilux 4 after 5.02 FW upgrade

    Hello,
    Since the upgrade to 5.02 FW, my Profilux 4 no longer shows in my router DHCP client table. I did not make any change in the routers settings.

    The Profilux 4 is connected to the router using a network cable and i can access the profilux 4 from my laptop wirelessly no problem, but as it has no IP i cant get the webserver up.
    undertale yellow
    under LAN setting in the "System" tab on profilux control its set to obtain IP address automatically which is fine and i have put my external IP address in the external IP address field but that didnt change anything
    Last edited by donaldchaney; 23.04.2024 at 20:23.

  2. #2
    Join Date
    10.10.2013
    Posts
    1,095

    Default

    Hello,

    I see several inconsistencies here.
    The ProfiLux 4 has no Ethernet LAN port.
    The ProfiLux 4 cannot work with firmware as old as 5.02.
    The ProfiLux 4 has a WiFi ESP module that handles everything network-related and it has its own firmware independent of the ProfiLux firmware.
    Can you clarify?
    The best thing to do is to open a support ticket so that we can help you directly: https://www.aquariumcomputer.com/sup...ets-enquiries/

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •