I have created a project, transmitted it to the light channels and saved it to the lamp. Here is the problem:

The dimming is not synchronized with the project.

First, for example, at a certain time, the % for the blue is 100%, the overall brightness for the run is 100%, and the energy option is high efficiency at max 40%. So logically the output for the blue channel should be 100% x 100 x 40% = 40%. However, the display on the lamp shows 1%.

Second, when I open one run corresponding to my current time (so also the lamp's current time) and select "Output directly on lamp", the light is different/brighter than the light that was being generated by the lamp. I am confused.

I should note that when I do the test illumination run, it correctly matches that actual run of the lamp.

Am I missing anything.