Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 185 Gallon planted tank

  1. #1
    Join Date
    17.08.2009
    Posts
    136

    Default 185 Gallon planted tank

    This is my current project, it's 185 us gallons. The entire rig is controlled by a profilux 3ex that was originally upgraded from a profilux II. Controller is at least eight or nine years old and still trucking along. It runs 3 x 6 outlet digital bars (non PAB), a 4 outlet bar, slave Doser, expansion box, fan speed controllers, and several Evg boards to control my DIY lighting.

    Moonlight and accent lighting are achieved by 4 mitras simu bars, while the backlight is achieved using 4 old style simu spots and an rgb led strip.




  2. #2
    Join Date
    27.05.2015
    Posts
    2,496

    Default

    That sure is one stunning display you have there!

  3. #3
    Join Date
    17.08.2009
    Posts
    136

    Default

    Thank you!

    Here is the room it's in:


  4. #4
    Join Date
    17.08.2009
    Posts
    136

    Default

    Full gear shot:


  5. #5
    Join Date
    17.08.2009
    Posts
    136

    Default

    DIY lighting rig controlled by profilux:


  6. #6
    Join Date
    17.08.2009
    Posts
    136

    Default

    First generation profilux fans refurbished and used for led and canopy cooling.


  7. #7
    Join Date
    17.08.2009
    Posts
    136

    Default

    Back of the canopy loaded full of gear to drive the lighting:


  8. #8
    Join Date
    17.08.2009
    Posts
    136

    Default

    Backlight before filling:


  9. #9
    Join Date
    17.08.2009
    Posts
    136

    Default

    Dedicated computer for monitoring and profilux programming. It is hard wired to the rs232 port of the Profilux and also provides thunderstorm audio. There are two speakers and a subwoofer hidden in the stand.


  10. #10
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,729

    Default

    Gareth, this is really impressive
    are we allowed to use some of the pics for our gallery?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •