DALI expansion card

[Matthias]

Development is ready, production has been started.

PLM-DALI_600x177.jpg

What is DALI?
The card PLM-DALI is able to control ballasts or other dimmable devices (e.g. transformers for halide lamps) with DALI. DALI is a digital bus interface, that means all devices are connected over just one twowire cable. The differentiation is achieved through different addresses.
Advantages over the 1-10V interface are mainly the much easier wiring and the complete shut-off at 0% (using a 1-10V-interface an external shut-off circuit is needed, e.g. EVG-AP).

Technical data
- Up to 50 devices can be connected to one PLM-DALI
- The devices can be divided into 16 groups, each group represents one ProfiLux illumination channel
- DALI-port is galvanically isolated

Price & availability
Recommended retail price (incl. tax) in Germany 59,90Euro, we start shipping at 14.04.2009

We will soon offer all our dimmable light bars with DALI as an option.

[02wrxgt30r]

will this support any dali ballast?

what are some of the available dali ballast

[Matthias]

any ballast which is conform to the DALI standard
Most ballast manufacturers offer them, e.g. Osram or Sylvania

[Gilles]

Will you sell the 80w T5 dali ballast from osram?

[aqua_digital]

For all North American clients Dali in in T5 HO is still only available in 54watt by ALL manufacturers :mad:

Suggestion - Do what i have done, install a 220V line

[Gilles]

Thank god i live in Netherlands

[Matthias]

we will offer all dimmable 230V T5-ballasts from Osram with DALI option

[Gilles]

Can you PB me a price for 6x Osram QTI DALI 80w with product number 4050300870342 ?

[wrang]

Development is ready, production has been started.

PLM-DALI_600x177.jpg

What is DALI?
The card PLM-DALI is able to control ballasts or other dimmable devices (e.g. transformers for halide lamps) with DALI. DALI is a digital bus interface, that means all devices are connected over just one twowire cable. The differentiation is achieved through different addresses.
Advantages over the 1-10V interface are mainly the much easier wiring and the complete shut-off at 0% (using a 1-10V-interface an external shut-off circuit is needed, e.g. EVG-AP).

Technical data
- Up to 50 devices can be connected to one PLM-DALI
- The devices can be divided into 16 groups, each group represents one ProfiLux illumination channel
- DALI-port is galvanically isolated

Price & availability
Recommended retail price (incl. tax) in Germany 59,90Euro, we start shipping at 14.04.2009

We will soon offer all our dimmable light bars with DALI as an option.

If i get one DALI card how do i connect to the EVG unit?
All cabels to the Dali unit or how do i do?
I plan to build a new dimmeble light with 10 T5 light (5x 2x39watt)

[GHL Support]

DALI has got 2 wires for controlling. (called DA and DB) Each EVG get the same 2 wires from the card. So maybe it is better to collect all EVG Datalines to a wire nut (DA and DB on seperate ones) inside your lamp and get out of the lamp with only 2 wires to the dali card. On this way you dont have such a mess with all the cables.
But, your way will work also.