Originally Posted by
Helipad
Hi All,
I believe this subject has already been discussed and it should be easy to solve, but for some reason I'm struggling in getting my current pumps organized.
I have connected to my profilux 4 Tunze Pumps (2 nanos and 2 6105 Turbelles), each 2 are connected via L1L2 trough Y splitter and T1 and T2 cables. the same way for the other 2 pumps connected to L3L4 port.
my plan is to have them in 2 groups and work opposite each other Group 1 left side of the tank and Group 2 right side of the tank, when one group is active the other one is not and vice-versa
Thank you for the help.
Regards
Pedro
I suggest you have them on one group as it wil lbe easier to manage timing with the pumps.
With one group you put one side of the tank as pump 1 and 3 and the other side pump 2 and 4.
Select permanent opposite and this will make the odd pumps go when the even pumps stop and vice a versa.
You can do the same with 2 groups but not sure if the timing between the two groups will be for each side will be together.
Call me Paul !
Note: I am not GHL staff!
Bookmarks