Redox - Ozone on to reach target value but also on timer

[keneil01]

Well... First of, Im aware of all the all the danger with ozone....

My sump is located at an remote place and away from wife and kids.
I would like to to set a target value, but I would like the ozone to be on only at a spesific time (03-05).
I thought i might set it like I did with the Ph on the Co2 with "time of", but I can not find that option under redox.

Can anyone help me in the right direction?

Your help is much appreciated!

[keneil01]

The ozone generator is currently set to redox increase

[Antipodes]

Do you mean to have it only running between 0300 and 0500?

[keneil01]

Yes, and backup function that it will turn off if it reach target value


Sent from my iPhone using Tapatalk

[Antipodes]

OK I have not tested this, but it should work. (You need to test by changing time when you configure it to see if it works correctly)

Go to Processes and create a timer that is not used for anything else.
Select Day interval
Select Repeat all 1 days (This will then operate every day)
Go to new at top RH of this timer page.
Select 0300 start and 0500 end. (or what time you actually want)
Ensure switchmode (Bottom RH) is set to Normal.
Save changes

Go to programable logic
Select unused G number
Enter input 1 of Redox 1 increase
Enter input 2 of Timer xx (xx being the timer number you created above)
Function is AND ( This will allow the redox to come on only if it commands a increase AND the times are between 0300 and 0500)

Create a discription and select OK!

Go to System and socket functions
Select the socket your Ozoniser is plugged into.
Go to Function and select Programable logic xx (xx being the number you created above)

Create a description for the socket (If not already done)

Go to Redox page and enter the nominal value wanted.


Now go up to the save function and save.

All done

[keneil01]

It works perfect - Thank you!

One minor detail you can add to your description is that under timer the switchmode must be "normal". Then its complete to the next person searching for the same thing.

Again.. Thanks for your help

[Antipodes]

Your right.
It defaults to this so I did not think it was a problem.
But will change the desciption above.

I would like to put all these examples together as a FAQ or wiki, but sort of don't have that spare time.

This example is pretty simple one, but I have seen some really complex solutions that can be achieved on this controller.