Results 1 to 4 of 4

Thread: Help... I need pauses of 15 seconds

  1. #1
    Join Date
    25.08.2009
    Posts
    5

    Default Help... I need pauses of 15 seconds

    I have a bad surface suction extractor... I needs to shut of for about 15 seconds every 30 minutes for it to work correctly.

    I have tried back and forth with the cyclic but I just cant find a solution...must be my intelect failing...lol

    So what I need is... S4 on for 30min then 15 sec pause then back on for 30min and pause 15 sec... and so on en on until eternity.

    Is this possible? If so how please?

  2. #2
    Join Date
    25.08.2009
    Posts
    5

    Default

    No one? Please some support I am stuck.

  3. #3
    Join Date
    20.02.2009
    Location
    Almacelles
    Posts
    150

    Default

    I think this is not possible at the moment. Yes in future versions but you can try this:
    1. Dosing program nº 1
    2. Flow Rate: 60
    3. Dosings/Day: 24
    4. Rate/Dosing: 100
    5. Programmable logic nº 1
    6. Input 1: Dosing Pump nº 1
    7. Function: Delayed off function
    8. Time: 3400 s
    9. Assing to desired socket Programmable logic function nº 1


    With this function it will start the socket function for 100 sec + 3400 sec = 3500 seconds. Then it will stop for 100 seconds until next hour
    It's doing this process every hour. Try it, I suppose it will work
    GHL Iberia

  4. #4
    Join Date
    22.10.2009
    Posts
    14

    Default

    Couldn't you combine the cyclic function with the delayed off function?

    Set cyclic to 15 seconds and delay off to 1785 seconds. That may or may not work, just a guess.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •