Originally Posted by
Gilles
I bought the propellercontrol for this. it is rated at 800ma so this means when you have 200ma fans, you can connect 4.
In my scenario i have a DALI card for my lights, and dosing pump so i have 1 free 1-10v interface.
First you connect the propellercontrol to the profilux. This can be in a 1-10v interface socket. The other end you can connect to your fans. Or, if you don't have the right connector (like me) you open up the propellercontrol and solder a new connection onto the PCB. This however, REMOVES YOUR WARRANTY. I have now custom fans controlled by the profilux in my canopy.
They always run at low speed if the temperature is oke, so there are no drips in the hood.
-- Gilles
Bookmarks