Results 1 to 7 of 7

Thread: PLM-PWC using Exp Box

  1. #1
    Join Date
    21.06.2011
    Location
    South Florida
    Posts
    827

    Default PLM-PWC using Exp Box

    Can I add the expansion card to the Exp box or does it need to be directly to the P3?

  2. #2
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    The Firmware of the ExBox doesn't support this card yet, so you should add it into the PL at the moment.

  3. #3
    Join Date
    21.06.2011
    Location
    South Florida
    Posts
    827

    Default

    Ok.
    Thank you.

  4. #4
    Join Date
    07.03.2013
    Location
    Jaen
    Posts
    108

    Default

    When you have estimated that supported the expansion box the PLM-PWC

  5. #5
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,709

    Default

    this is very difficult and much reprogramming is required, unfortunately I can't give you a date by now
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    08.04.2009
    Posts
    265

    Default

    Any idea when the wireless card can be used on expansion box?? its been a year since requested. you would think this should have been done before release.
    My profilux has no more free slots, so i need to add to the expansion box.
    Last edited by reef; 01.01.2015 at 06:07.

  7. #7
    Join Date
    30.06.2013
    Posts
    111

    Default

    An old thread, but I have the same question...

    I have tried to find a changelog file for the firmware update, but no luck.

    I am ready to buy several mitras if this works, if not, I will consider something else. Im not willing to run a USB cable trough several rooms and down to the basement where the P3 is located.
    Last edited by keneil01; 19.07.2016 at 23:36.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •