Expansion box ISSUES

[reeferqq]

Reload FW by flasher tool?

[doggydoc10]

I am not sure if that can be done only for PAB Exp box?

[Matthias]

This is really weird, but I have a solution.
I change something in ProfiLuxControl which forces the PAB update buttons to be enabled, no matter what the system condition is.

Will come in a few minutes.

[doggydoc10]

Awesome. Thank you.

[Matthias]

here is the new PLC:

http://forum.aquariumcomputer.com/do...do=file&id=131

I tested it: first I killed the firmware in my EXB (power off in the mid of a firmware update), then I performed an emergency update with PLC
-> it worked perfectly

use the update PAB function in the file menu

[doggydoc10]

Thank you VERY MUCH M.
Will try to download later and will report back.

[doggydoc10]

Problem solved.
THANK YOU Mathias and Frank for helping. I was able to do a flash update and Exp Box is back to working status.
Thanks again.

[GHL Support]

BTW:
I've used the PLC Version V6.0.0.1 ... and there the menu was activated
Otherwise I wouldn't told to try this... really strange.
But finally you could solve the problem.

[reeferqq]

Problem solved.
THANK YOU Mathias and Frank for helping. I was able to do a flash update and Exp Box is back to working status.
Thanks again.

Glad to hear that Exp box is back to work , could you pls share the method how to fix it?

[doggydoc10]

here is the new PLC:

http://forum.aquariumcomputer.com/do...do=file&id=131

I tested it: first I killed the firmware in my EXB (power off in the mid of a firmware update), then I performed an emergency update with PLC
-> it worked perfectly

use the update PAB function in the file menu

Just follow the above instructions. Connect Exp box, go to PLC under system tab and select "update PAB firmware". Follow the prompt and you are good to go!