Results 1 to 10 of 10

Thread: Downloads for PLM-PWC are available

  1. #1
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default Downloads for PLM-PWC are available

    In order to connect Mitras and ProfiLux with a PLM-PWC wirelessly major software changes were necessary.

    Please perform these updates:

    1. GHL Control Center 1.0.3.1
    2. Mitras Firmware 1.15 (is also included in the new GHL Control Center integriert)
    3. Update ProfiLux to 6.00, still using the "old" ProfiLuxControl 5.x - Attention: Save settings and sensor data before!
    4. ProfiLuxControl 6.0.0.0 (ProfiLux with 6.00 can't be operated with the older ProfiLuxControl)

    That's it.

    Set the Mitras to "Slave", then ProfiLux with its PLM-PWC takes the control of the Mitras.

    The firmware had been tested intensively, however we classify it for a few days as a beta-version.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  2. #2
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    that was fast . new software already out wireless card is on the way thank you
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  3. #3
    Join Date
    21.06.2011
    Location
    South Florida
    Posts
    827

    Default

    Can't wait. Ty

  4. #4
    Join Date
    04.08.2010
    Posts
    50

    Default

    Downloads keep saying File Not Found.

    Ben

  5. #5
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    Quote Originally Posted by scriptdaddy View Post
    Downloads keep saying File Not Found.

    Ben
    download center was temporarily down - all fixed now
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    01.01.2013
    Posts
    104

    Default

    I'm all updated and waiting on the card now, this should be good and has been worth the wait!

  7. #7
    Join Date
    03.12.2011
    Location
    Græsted
    Posts
    127

    Default

    Hi guys, got my Card today, updated Profilux, and Mitra´s, and WOW, it works, love it, Imported my project file, and Profilux is now in control of my 5 Mitras. However, i cant get them to react on thunderstorms, at the moment i only tested manually started storms, but will try to see if they react on the random or scheduled storms.

  8. #8
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    ProfiLuxControl: check "darkening at thunderstorm" in each illumination channel for the Mitras (usually 1 - 9)
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  9. #9
    Join Date
    03.12.2011
    Location
    Græsted
    Posts
    127

    Default

    Hi Matthias.

    They are enabled. :-)

  10. #10
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    In the thunderstorm settings, have you set the intensity, thunder brightness and the darkening rather high? Then you can see the effect best.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •