Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Firmware 4.08

  1. #1
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default Firmware 4.08

    new manual (programming guide) for firmware 4.08 is ready for download
    firmware 4.08 and ProfiLuxControl will follow tomorrow

    New in 4.08
    - Digital inputs of the expansion card PLM-ADIN can be used
    - New level control operation mode "return pump"
    - Burn-in function also for DALI
    - New socket functions "Thunderstorm" and "Digital input"
    - Accuracy of the internal clock can be trimmed

  2. #2
    Join Date
    11.05.2009
    Posts
    77

    Default

    Not yet

  3. #3
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    we are still checking all functions

    since many changes had been made (internally in the source code) to prepare 4.08 for the next step (5.00) the testing takes longer as expected

    I hope we can upload the files today

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default 4.08 now available!

    download here:

    http://www.aquariumcomputer.com/Syst.../download.html

    since the ProfiLux will be reset ti default settings during this update it is very important that sensor data and settings are saved before the update! After update just load these files back.

    Important: 4.08 has Beta-state! Bugs can't be excluded!

  5. #5
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    and here the same hint like always:

    before installation of ProfiLuxControl 4.08 first uninstall the old version completely!

    installation and uninstallation under same user with admin rights!

  6. #6
    Join Date
    11.05.2009
    Posts
    77

    Default

    I finally got the 4.08 on the profilux!!

    It seems the my redox value is not in the redox 1 control box.

    it is in the sensor overview..

    EDIT:

    all boxes are missing the current sensor information... Temp, Redox, Mv and Ph
    i think its in the profiluxcontrol 4.08 and not in the firmware
    Attached Images Attached Images
    Last edited by Martin_S; 29.08.2009 at 22:46.

  7. #7
    Join Date
    11.05.2009
    Posts
    77

    Default

    I got some strange read out in the System tab

    Property - Valvue

    see reaction time vs Redox ?

    again i think its the profiluxcontrol as i been back to frimware 4.05 to see it that was the problem
    Attached Images Attached Images
    Last edited by Martin_S; 29.08.2009 at 23:01.

  8. #8
    Join Date
    11.05.2009
    Posts
    77

    Default redox control

    as u figured out by now ..ive been bussy settting my profilux with 4.08 profilux control and 4.08 firmware.

    without some screen issues in profiluxcontol. it seems i found another issue.

    It seems that my sockets function for redox doen not read the value of the redox.

    its not reacting on any value..

    Its either Redox1 Decrease or increase an invert that..

    i tryed all combinations and i want the socket to go on at Redox -200.

    but it does not do that..

    what i invert it .. it will stay on.. even to -150 while Hysteris is 10 .
    so i stoped it manual

  9. #9
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    to the names in the system dialog: it seems some of the strings lost their correct location
    -> this doesn't affect any function of the ProfiLux - please ignore it for now, we will fix the strings in the next version

    redox control does not work - I saw on your screenshot that the sensor is not activated -> so it is no wonder that the control loop is not working -> activate the sensor

  10. #10
    Join Date
    11.05.2009
    Posts
    77

    Default

    Quote Originally Posted by Matthias View Post
    to the names in the system dialog: it seems some of the strings lost their correct location
    -> this doesn't affect any function of the ProfiLux - please ignore it for now, we will fix the strings in the next version

    redox control does not work - I saw on your screenshot that the sensor is not activated -> so it is no wonder that the control loop is not working -> activate the sensor
    Matthias... that screenshot was while i was testing all possibilities..

    EDIT..

    MY stupidity..... need to put in a - value... and not just 200 ( -200 )

    It works now..... ( stupid stupid me )
    Attached Images Attached Images
    Last edited by Martin_S; 30.08.2009 at 09:56.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •