Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Kessil A360

  1. #1
    Join Date
    14.12.2012
    Posts
    54

    Default Kessil A360

    Anyone know if It's possible to control that led using profilux?


    Med vänlig hälsning, Björn

  2. #2
    Join Date
    14.12.2012
    Posts
    54

    Default

    Anyone??


    Med vänlig hälsning, Björn

  3. #3
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Due it has a 0-10V input, it should be no problem to connect it to a L-port of the Profilux.

    However, there is no ready-made cable for that

  4. #4
    Join Date
    14.12.2012
    Posts
    54

    Default

    Quote Originally Posted by Gunther View Post
    Due it has a 0-10V input, it should be no problem to connect it to a L-port of the Profilux.

    However, there is no ready-made cable for that
    Thanks Gunther!
    Straight to a L port or do I have to use some kind of evg device?


    Med vänlig hälsning, Björn

  5. #5
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    Straight to an L-port.
    You may use a splitter in between to split the two channels of an L-port and/or use a EVG-AP-2F-HIC to also switch on/off the power.

  6. #6
    Join Date
    14.12.2012
    Posts
    54

    Default

    Thanks!


    Med vänlig hälsning, Björn

  7. #7
    Join Date
    05.02.2013
    Posts
    5

    Default

    Does anyone have pictures on how it should be connected and when it works? I have a Profilux II, tried to make a connection with a EVG-AP-2F-HIC to an L port. No light at all unfortunately.

    Used a 3.5mm jack plug with to wires, + and - on the EVG.

    Thanks!

  8. #8
    Join Date
    13.08.2010
    Posts
    4,148

  9. #9
    Join Date
    05.02.2013
    Posts
    5

    Default

    Thanks, but is it also possible to only use the + and - from the Jack plug with the profilux steering cable?

    The driver of the Kessil is in a sealed box and I prefer not to take these original parts apart.

  10. #10
    Join Date
    05.02.2013
    Posts
    5

    Default

    Somebody?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •