"Delayed On" function for digital powerbar sockets

[TheManicFishkeeper]

One thing that I am always struggling with is how the profilux automatically starts up sockets designated as "Filter" as soon as power is restored following an outage. When this happens the water level in my sump is generally much higher then it usually is so it causes my skimmer to overflow from the extra water.

I would "love" to have a programmable option for a delayed start on a socket when the unit powers on. For example:

My skimmer uses 3 x Sedra 9000 pumps, for this example they will be plugged in to Sockets 1 through 3.

During Power on Socket 1 starts automatically.
Socket 2 Starts 1 minute later
Socket 3 Starts 2 minutes later

With this configuration the time delay between sockets starting up allows the height of water in the skimmer to rise slowly and balance out before starting additional pumps.

Just a thought, as it would make my life easier, and keep my floors a lot drier during power outage season!

[Matthias]

this function is already available - a "Blackout delay" for each socket can be adjusted

[deepblue]

this function is already available - a "Blackout delay" for each socket can be adjusted

In 4.05 version this is working only in case of power failure but there is not delay after exiting maintenance mode.