ProfiLux Computer Webinterface

[DennisO]

24/ week/ month bar is available for Chrome, Firefox, IE.

[Antipodes]

@Antipodes
The web interface gets time from ProfiLux Computer.
Which Beta is installed?

Firmware dated the 23/7/2013 (Downloded and installed on the 29/7/2013.)
But the probe page below is 12 hours out to main system time as shown by the latest time line on the graph which shows 8:30 when it should be showing 20:30.
I also note that the date is set as D/M/Y but is showing in the graph as M/D/Y
On the Profilux control software main page it does show the time as D/M/Y?
PLC mainpage.jpg

Your graphs show 4 ticks on time axis, which should show max 3 of them.
Does anybody have also 4 ticks on time axis?

This only seemed to be after the update when it had no measurement parameters. Once it had a few measurements to pull from it seem to go to a 3 line axis.
Overview_graphs.jpg

Thanks for looking at this! And thanks for the work you have put into this already. It is looking pretty good for me and as I don't use Android or iAnything, means it works on all my windows devices! Looks great on my windows Tablets!

[Antipodes]

Dennis, sorry tried to edit the post above, but it failed.
Firware date 23/7/2013 and downloaded installed on the 29.

The date is reading D/M/Y on the Profilux control mainscreen, so not sure why it is reading reversed in the web page.
PLC mainpage.jpg

[DennisO]

It's really strange, because data is parsed from measurment data from sensor. I'll take a closer look to this.

[Tone]

I have the same problem ... reported here

Though mine thinks it is a crystal ball predicting the future by a few weeks.