Results 1 to 3 of 3

Thread: GHL lightbar

  1. #1
    Join Date
    09.07.2012
    Posts
    4

    Default GHL lightbar

    hi

    i've just purchased a GHL lightbar unit, with power supply, z holder and communication cable.

    the question is, do i need a splitter to be able to use the dimmed operation?

    if no, to where am i supposed to connect the communication cable? i supposed one end is to GHL profilux itself and the other end to the light. but which part of light?

    thanks

  2. #2
    Join Date
    03.12.2012
    Location
    Koblenz
    Posts
    181

    Default

    Hi,

    the connector is located in the splitter-housing. So, you do need one to dim the lightbar.

    Greetings
    Holger


    Gesendet von meinem iPad mit Tapatalk HD

  3. #3
    Join Date
    06.02.2012
    Posts
    2,020

    Default

    The possible configurations are describet at -> https://www.aquariumcomputer.com/en-...itras-lightbar

    Configuration #3 is the one that fits your request. If you have a look at the splitter, you will see the small plug for the control cable at left side.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •