Results 1 to 3 of 3

Thread: Screenshot for Tunze pumps logic programming PLEASE!!!

  1. #1
    Join Date
    25.05.2010
    Posts
    21

    Default Screenshot for Tunze pumps logic programming PLEASE!!!

    I have Profilux 3 ex serving a tank with 2 Tunze pumps on each side one 6105 and one 6155 and I would like to switch from minimum to maximum power the 6105 on the right and the 6155 on the left and then the opposite switching one 6155 on the right and one 6105 on the left. Could somebady send me screenshot for this tipe of program please?

    Since I would like also to switch off the 4 pumps for 4 times a day for 15 minutes time for each time since they are under a Powerhub 6D what to do?


    Thank you for the help.
    Alfonso

  2. #2
    Join Date
    30.01.2013
    Location
    Gold Coast
    Posts
    108

    Default

    Hey i have mine set up with Illumination control, they shut off at 12 for 1 hour for feed mode and at night they shut off when light go off.
    I also control the speed of the pump over the day

  3. #3
    Join Date
    25.05.2010
    Posts
    21

    Default

    Could anyone help???Please!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •