I am going to order profilux 3.1 N megaset and i want to control my leds with illumination program but i dont know which ledcontrol i need.
the tank has 300cm x 100cm footprint it needs about 300-400 3 watts leds . the leds need 3.2v at 700mA
i am planning to order 24 x Mean Well ELN-60-48P and 12 x Mean Well ELN-60-27P total 36 channels.
i can buy other drivers if it is needed
Profilux can control up to 32 i can union some of them no problem but the problem is
ledcontrol4passive
Max allowable difference in potential at the outputs: 24 V
Maximum current per channel: 12 mA
Number of Channels: 4
Input voltage range analog inputs: 0 V ... 10 V
PWM switching frequency: 200 Hz
Mean Well ELN-60-48P dimmable driver
0 ~ 1.3A current range
24-48V DC Voltage (runs ~8-14 LEDs)
But v and A doesn't enough to control only one of them
if it is possible to control with ledcontrol4 active i wont buy the drivers
if ledcontrol4passive or ledcontrol4active ok to control it has 4 channels so how i get 32 channels do you know the parts i needed ?
i don't need thunderstorm or wheather effects
i just want sunrise and sunset if it is also impossible i just want to connect to profilux
thx.......
Bookmarks