Emergency skimmate collector with level sensor

[tramsden]

Hi
I have to go in hospital for a few days and need to setup a skimmate collector which will turn off the skimmer when full.

Can anyone tell me how to setup the optical sensor I have to do this, I have a 5 litre container I can use to collect the skimmate. It's all a bit off a rush.

The skimmer is on a GHL pab socket, which is set to always on, the level sensor is connected to level 3. Profilux EX.

Thanks
Tony

[doggydoc10]

Can you use a level sensor and place it inside of the chamber?
I cut and spliced the cable and inserted inside the collection cup.
That worked for me.



Doggydoc

[tramsden]

But how do I set up Profilux to turn off skimmer when full

[doggydoc10]

Assigned THAT level sensor lets say sensor 1 to the socket in which the PS is plugged into.
Then use Fill Water 1 and assign that to the Socket in which PS is connected.
That should be it.
Test it before but once you have that you can play with sensor. I am using leakage sensor as my input. And them I have it set up for it to trigger 2 seconds after water hits the sensor. Then PS will turn off and I will receive an alarm.



Doggydoc

[tramsden]

I'll try that. Thanks