Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Wow that was easy

  1. #1
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Daumen hoch Wow that was easy

    It was always going to happen! Even i am now connected, system visible outside and app installed.

    Took 2 minutes and totally hassle free.
    Last edited by aqua_digital; 25.03.2013 at 23:42.


    GHL ProfiLux Canada/USA Distribution and support

  2. #2
    Join Date
    08.02.2013
    Location
    Victoria BC
    Posts
    164

    Default

    well what is the trick come on we all want to connect
    profilux 3x wireless enabled 3 ecotech pumps and wireless adapter
    3 Simuspots 2 levl sensors ( min /max)
    4 channel dossing pump 2 PAB 6 outlets
    Temp PH and redox sensors 2 mitras 6100HV
    touch Condutivity sensor wireles card

  3. #3
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    providing you have you controller networked and visible to the outside network it is very simple (I will add however that there is an ongoing connection issue that GHL are sorting out this week and uploading a new version, this is where once connected you get various reports of device not responding)

    Putting that aside -

    All you need is your IP address of your home and the port being used, typically the port is port 80

    You also need your profilux's password which you should have set when setting up your system on your home network.


    GHL ProfiLux Canada/USA Distribution and support

  4. #4
    Join Date
    23.08.2009
    Posts
    228

    Default

    Just a thought, but if your router supports Dynamic DNS registration its a good idea to set this up. Your ISP provided IP address can change from time to time (particularly after a power outage) so its best to use a free service like DynDNS which your routers provides your external IP address to and you have a semi configurable user friendly web address. .e.g. http://magicamikes-profilux.dyndns.org for which you can configure your app to connect to. This way if your ISP provided IP address changes for whatever reason, your router updates your DynDNS account, your none the wiser and you can still connect to your profilux.

  5. #5
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    good advise, I know mine does not support dynamic which is a PITA


    GHL ProfiLux Canada/USA Distribution and support

  6. #6
    Join Date
    14.10.2009
    Location
    Dubai
    Posts
    168

    Default

    What is special about this procedure? This is the normal way you connect to your PL3 and app??


    Quote Originally Posted by aqua_digital View Post
    All you need is your IP address of your home and the port being used, typically the port is port 80

    You also need your profilux's password which you should have set when setting up your system on your home network.

  7. #7
    Join Date
    14.10.2009
    Location
    Dubai
    Posts
    168

  8. #8
    Join Date
    19.02.2009
    Location
    MANOTICK
    Posts
    866

    Default

    Quote Originally Posted by diverdutch View Post
    What is special about this procedure? This is the normal way you connect to your PL3 and app??
    I did not say this was special, I said it was easy.


    GHL ProfiLux Canada/USA Distribution and support

  9. #9
    Join Date
    08.04.2009
    Posts
    265

    Default

    a free service like DynDNS
    does not look like it is free

  10. #10
    Join Date
    23.08.2009
    Posts
    228

    Default

    It is free, it allows you a 1 host service without charge. Been using it for about 5 years now.


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •