Results 1 to 3 of 3

Thread: Need some help getting WLAN/router security settings to match

  1. #1
    Join Date
    31.03.2009
    Posts
    30

    Default Need some help getting WLAN/router security settings to match

    Hi everyone,

    First I'd like to thank everyone on this forum for their generous help. All of you have really helped me out. Well, I did it!! I've gotten the WLAN card working and it's able to connect to my network, but for it to connect I have to leave the security settings on both the router and the WLAN configuration page off. I've tried several different security setting combinations but no luck. Would it be safe if I just disable the router and Profilux settings only when I want to connect to the Profilux, and then re-enable the router security when I'm done? Any help will, as always, be greatly appreciated.

  2. #2
    Join Date
    20.02.2009
    Location
    Almacelles
    Posts
    150

    Default

    So finally you can connect to your ProfiLux, that sounds great
    1. Acces your WLAN module directly from your web explorer (no password required)
    2. Activate Authentication
    3. Encryption 64 bits (it's shorter) and I think it's 10 hexadecimal chars
    4. Apply settings. It will restart the WLAN module
    5. Enter your router and do the same
    6. Restart your router
    7. Perhaps you will have to restart your ProfiLux again and wait for some minutes until the WLAN module connects to the router
    8. Look at the back lights of your WLAN module
    9. Try to connect
    GHL Iberia

  3. #3
    Join Date
    31.03.2009
    Posts
    30

    Default

    Thanks so much!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •