How to mount propellor fan on euro brace

**larryfl1** · 31.07.2009, 23:46

hey all,

i just got my 4 fan propellor breeze and controller...

i have a euro brace style tank...

I cant figure out how to mount the fan secureley to the euro brace...only looks like it can mount to vertical glass edge not horizontal

any thoughts? photos?

**larryfl1** · 01.08.2009, 03:09

these photos will show my issue...

***GHL Support*** · 03.08.2009, 12:50

Generally, PropellerBreezes can also be mounted at horizontal glass edges, if you pay attention that it doesn't get in contact with splash water...

**larryfl1** · 03.08.2009, 12:57

take a look at the photos... do i need the overall width including the knobs to fit between the braces? if so it appears my 4 fan setup is too wide...

**larryfl1** · 05.08.2009, 09:35

do i need a shorter setup?

it doesnt appear anyway to sercurely mount it horizontally....

i guess the other option is to take a vertical piece and silicon it to the tank creating a mounting bracket? i hate to have to do this...

***Matthias*** · 07.08.2009, 08:13

Hi Larry,

usually the PropellerBreeze is mounted on a vertical glass and then the knobs are above the tank.
The problem is the horizontal glass which is glued on the side glasses of your tank.

Anyway, I am sure you will find a way to solve this mechanical challenge...

but very important: the fans must not be too near to the water surface! Please read the shipped manual regarding this. If you would mount it in a way that the knobs are below the glass this would be definitely to near to the water!

**Micha578** · 07.08.2009, 09:09

For your safety i would prefere another method to mount it on the top of the water tank. Can´t you fit a vertical Glasstripe on the top to mount the Breeze?