Seite 1 von 3 123 LetzteLetzte
Zeige Ergebnis 1 bis 10 von 28

Thema: GHL Control Center Firmware Update

  1. #1
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard GHL Control Center Firmware Update

    Just removed the GHL CC and installed version 1.0.2.4 and tried to install firmware 1.08.
    Everything goes fine, I get to the last page and it says to unplug the light to reset it and press the ready button.
    First there is no ready button, so I press the finish button. Second, the firmware doesn't update and still shows 1.07.
    Any help here would be appreciated. Also do I have to update the firmware on the slave or does this happen automatically?
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  2. #2
    Registriert seit
    21.09.2011
    Ort
    Southampton
    Beiträge
    387

    Standard

    Yes mate, you have to update each lamp

  3. #3
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard

    Zitat Zitat von GazzMan Beitrag anzeigen
    Yes mate, you have to update each lamp
    Thanks, now I just have to figure out how to update even one lamp.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  4. #4
    Registriert seit
    21.09.2011
    Ort
    Southampton
    Beiträge
    387

    Standard

    Zitat Zitat von Halfmoon Beitrag anzeigen
    Thanks, now I just have to figure out how to update even one lamp.
    I don't want to teach you to suck eggs matey lol,

    connect mitras to laptop
    Hit the update button
    Follow the onscreen instructions
    Then reboot the mitras

    If you haven't done it by tomorrow, I'm doing mine so I'll post a step by stepa for ya

    Gazz

  5. #5
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard

    Zitat Zitat von GazzMan Beitrag anzeigen
    I don't want to teach you to suck eggs matey lol,

    connect mitras to laptop
    Hit the update button
    Follow the onscreen instructions
    Then reboot the mitras

    If you haven't done it by tomorrow, I'm doing mine so I'll post a step by stepa for ya

    Gazz
    That's what I did and the firmware doesn't update. Let me know how it works for you.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  6. #6
    Registriert seit
    21.09.2011
    Ort
    Southampton
    Beiträge
    387

    Standard

    Zitat Zitat von Halfmoon Beitrag anzeigen
    That's what I did and the firmware doesn't update. Let me know how it works for you.
    worked fine here Perry, did you install the usbvcom file mate, i had to install it manually?

  7. #7
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard

    Didn't install the usbvcom, since I can connect to the lights I figure the USB is working fine. I see there is an updated version of GHL CC so I'm going to try that one.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  8. #8
    Registriert seit
    21.09.2011
    Ort
    Southampton
    Beiträge
    387

    Standard

    You have to install usbvcom mate, or it won't install

    Yes, v108

    Gazz
    Geändert von GazzMan (31.01.2013 um 19:16 Uhr)

  9. #9
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard

    Thanks, I'll see how to do that then.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  10. #10
    Registriert seit
    17.11.2012
    Ort
    Louisiana
    Beiträge
    191

    Standard

    No joy, uninstalled all USB devices including root hubs. Restarted and let windows reinstall USB drivers. Installed the usbvcom driver, get the code 10, still can't updated the firmware, 1.09 now. Lost, friend. Never had USB problems like I have with the Mitras.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •