Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: GHL Control Center Firmware Update

  1. #1
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default GHL Control Center Firmware Update

    Just removed the GHL CC and installed version 1.0.2.4 and tried to install firmware 1.08.
    Everything goes fine, I get to the last page and it says to unplug the light to reset it and press the ready button.
    First there is no ready button, so I press the finish button. Second, the firmware doesn't update and still shows 1.07.
    Any help here would be appreciated. Also do I have to update the firmware on the slave or does this happen automatically?
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  2. #2
    Join Date
    21.09.2011
    Location
    Southampton
    Posts
    389

    Default

    Yes mate, you have to update each lamp

  3. #3
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default

    Quote Originally Posted by GazzMan View Post
    Yes mate, you have to update each lamp
    Thanks, now I just have to figure out how to update even one lamp.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  4. #4
    Join Date
    21.09.2011
    Location
    Southampton
    Posts
    389

    Default

    Quote Originally Posted by Halfmoon View Post
    Thanks, now I just have to figure out how to update even one lamp.
    I don't want to teach you to suck eggs matey lol,

    connect mitras to laptop
    Hit the update button
    Follow the onscreen instructions
    Then reboot the mitras

    If you haven't done it by tomorrow, I'm doing mine so I'll post a step by stepa for ya

    Gazz

  5. #5
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default

    Quote Originally Posted by GazzMan View Post
    I don't want to teach you to suck eggs matey lol,

    connect mitras to laptop
    Hit the update button
    Follow the onscreen instructions
    Then reboot the mitras

    If you haven't done it by tomorrow, I'm doing mine so I'll post a step by stepa for ya

    Gazz
    That's what I did and the firmware doesn't update. Let me know how it works for you.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  6. #6
    Join Date
    21.09.2011
    Location
    Southampton
    Posts
    389

    Default

    Quote Originally Posted by Halfmoon View Post
    That's what I did and the firmware doesn't update. Let me know how it works for you.
    worked fine here Perry, did you install the usbvcom file mate, i had to install it manually?

  7. #7
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default

    Didn't install the usbvcom, since I can connect to the lights I figure the USB is working fine. I see there is an updated version of GHL CC so I'm going to try that one.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  8. #8
    Join Date
    21.09.2011
    Location
    Southampton
    Posts
    389

    Default

    You have to install usbvcom mate, or it won't install

    Yes, v108

    Gazz
    Last edited by GazzMan; 31.01.2013 at 19:16.

  9. #9
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default

    Thanks, I'll see how to do that then.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

  10. #10
    Join Date
    17.11.2012
    Location
    Louisiana
    Posts
    192

    Default

    No joy, uninstalled all USB devices including root hubs. Restarted and let windows reinstall USB drivers. Installed the usbvcom driver, get the code 10, still can't updated the firmware, 1.09 now. Lost, friend. Never had USB problems like I have with the Mitras.
    Perry
    A screen shot is worth a thousand words...

    Profilux 3.1N eX, 3 PAB 6D, Slave Doser, PLM-ADIN, Vortech Controller, PLM-PWC, Leak detector, 2 LX 6100HV Mitras
    Controlling a 150 DSA Peninsula mixed reef.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •