Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Sms 2.01

  1. #1
    Join Date
    23.02.2011
    Posts
    112

    Default Sms 2.01

    One day for no good reason
    This has happened:
    Alarm set to just new - is the first SMS I get when there is a power cut (never did before)
    How ever a power cut set to just new is arriving when the power returns?
    Any idea why is this happening?
    Thanks

  2. #2
    Join Date
    21.06.2011
    Location
    South Florida
    Posts
    827

    Default

    Can you explain better?
    Sorry not sure what you are asking!!!

  3. #3
    Join Date
    23.02.2011
    Posts
    112

    Default

    All was working fine and even thou I made no changes I get a salat out of the alarm setting?…

  4. #4
    Join Date
    21.06.2011
    Location
    South Florida
    Posts
    827

    Default

    Are all the led lights on the front working? Do you have a signal?
    If not I would try disconnecting--power off and on.
    I have gone thru that once and I solved it like that.

  5. #5
    Join Date
    03.09.2012
    Posts
    130

    Default

    Yes, sorry I also do not fully understand your problem.....
    Are you saying that you get an alarm msg sent to you when there is a power cut?


    Sent from my iPad using Tapatalk HD

  6. #6
    Join Date
    23.02.2011
    Posts
    112

    Default

    I'm saying the SMS module works. But it send thous SMS not when it spouse to, like power cut when power return rather then just new, as programed.

  7. #7
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    I think this is the question:

    You get more than 1 SMS when an event happens although the settings are correct, right?

    Maybe the power returned several times?

    Do this test:

    unplug the SMS-unit - plug it in again - how many SMS do you receive?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  8. #8
    Join Date
    23.02.2011
    Posts
    112

    Default

    This is the Q:
    Alarm that is set to just now is arriving at just over and vise verse. I did not change a thing and it used to work fine before. The question is why? And how to go back?

  9. #9
    Join Date
    03.09.2012
    Posts
    130

    Default

    Did you get this resolved?


    Sent from my iPad using Tapatalk HD

  10. #10
    Join Date
    23.02.2011
    Posts
    112

    Default

    No I did not. I changed all settings from just over to just new and other way around, delete alarm. Saved, turned off turned on changed all setting again… and still alarm like power cut is sending when it's just over rather than just new and so on.
    Hopefully in the next fw…

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •