Seite 3 von 5 ErsteErste 12345 LetzteLetzte
Zeige Ergebnis 21 bis 30 von 49

Thema: SW and Mitras placement

  1. #21
    Registriert seit
    21.06.2011
    Ort
    South Florida
    Beiträge
    803

    Standard

    Here you go
    This is early in the am. Showing reds and violets dialed up

  2. #22
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.638

    Standard

    what was the question again?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #23
    Registriert seit
    17.10.2012
    Ort
    Bærum outside Oslo, Norway
    Beiträge
    28

    Standard

    From the original post the question concerning Windows 7 Starter remains to be answered.
    In the meantime I have bought a new laptop PC with Windows 8. I have not tested the SW on this yet.

    I also thought I would like to show a picture of my tank with the Mitras lamps, but have not succeeded in uploading pictures

  4. #24
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.638

    Standard

    ok, I check if we can do something about the Windows 7 Starter issue you have
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #25
    Registriert seit
    17.10.2012
    Ort
    Bærum outside Oslo, Norway
    Beiträge
    28

    Standard

    As I wrote in my last post, the Windows 7 Starter OS is no issue any longer as I was anxious to get a functional PC and have bought a Win8 PC instead.

    I have however problems with connecting this PC to the lamps, I get the following message:

    "Could not Connect. Do you want to check the settings now"

    When confirming and ending in trying to update driver through internet the following message occurs:

    "The inf file from third party contains no information about digital signature"

    Maybe the sw is not ready for win8 yet?

    By the way I have tested both with the 1.0.2.2 and the new 1.0.2.3 SW version and only connection through the USB cable.

  6. #26
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    I suspect you need to manually configure the COM port.

    when "Could not Connect. Do you want to check the settings now" comes up click on yes and then Click on device manager and locate under com port the driver the mitras is using, then input that in the dialogue box in the software


    GHL ProfiLux Canada/USA Distribution and support

  7. #27
    Registriert seit
    17.10.2012
    Ort
    Bærum outside Oslo, Norway
    Beiträge
    28

    Standard

    I can not find any COM ports in the devicemanager, but have tried to update drivers for both USB2 ports and that is defined as succesful, and thereafter updating driver for the Mitral LX6xxx.

    It is when doing this the last error message mentioned occur.

  8. #28
    Registriert seit
    21.06.2011
    Ort
    South Florida
    Beiträge
    803

    Standard

    Funny, that's the same problem I had and I was told it was an issue with my connection. Are you connecting using parallels? Via MAC?
    I am wondering what the poss solution to this problem might be!!!

  9. #29
    Registriert seit
    19.02.2009
    Ort
    MANOTICK
    Beiträge
    866

    Standard

    Zitat Zitat von NorwayEagle Beitrag anzeigen
    I can not find any COM ports in the devicemanager, but have tried to update drivers for both USB2 ports and that is defined as succesful, and thereafter updating driver for the Mitral LX6xxx.

    It is when doing this the last error message mentioned occur.
    when clicking on device manager it should look like this



    note the GHL driver in the COM port



    Please post a screen shot of your device manager page with the com port tab open as above


    GHL ProfiLux Canada/USA Distribution and support

  10. #30
    Registriert seit
    17.10.2012
    Ort
    Bærum outside Oslo, Norway
    Beiträge
    28

    Standard

    devicemanager.jpg

    As shown there is no Ports (COM & LPT) chapter, instead there is a USB Controller chapter

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •