Profilux II & Dosing unit Setup help...

**Buzbie** · 07.07.2012, 09:21

I've finally managed to get a dosing unit for my profilux Plus II and would like some help getting it to work, I have a 6 socket digital powerbar on S1-S4 and would like to add my dosing unit but cannot figure out how I can do it. also I would like to know if you can get spare parts for it? pump no4 seems to be on all the time so i've disconnected it for now....

someone please help me....

**Gunther** · 07.07.2012, 09:44

In general it´s described all in the manual ... but anyway:

I suggest you want to use it at S1S4 togehter with the digital powerbar.

So unplug the powerbar,
plug in the dosing station
and start PLC and jump into socket menu.
Now you have to assign the dosing station to free socket numbers (I also suggest you use 1-6 for the pwerbar),
so assign the doser to 7-10.
Now unplug the doser,
replug the powerbar and
plug the doser into the free second socket of the powebar
All you have to do now is to asign the four sockets of the doser to four free timer and
to program the timer itself

also I would like to know if you can get spare parts for it?

Sure. See GHL shop or ask your dealer

pump no4 seems to be on all the time so i've disconnected it for now....

I bet, socket #4 of your powerbar is also always on at the moment .... they react parallel due they habe same socket number 1-6 aka 1-4
Do as said above and the problem is gone.

**Buzbie** · 07.07.2012, 11:05

Got it working now... Thanks Gunther, only problem is pump 4 is always on, I can't see why either... it should be off.. even tried to set it as off constantly

What a bit of kit this Profilux is.... Best investment ever.... now for the Sol's!!!