Zeige Ergebnis 1 bis 6 von 6

Thema: GHL needs your help!

  1. #1
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.631

    Standard GHL needs your help!

    We need some beta testers to test our new firmware and ProfiLuxControl!

    Although we did many tests during the development it is possible that major software changes cause unexpected problems "in the field", therefore we have to rely on our beta-testers.

    The new firmware and the PC-Software has been changed massively, especially the level control has been reprogrammed from scratch.
    These changes were necessary in order to prepare ProfiLux for the new flow sensors and level expansion cards.
    The new level control gives you more functions and flexibility.
    Furthermore an issue with displaying measurement values has been solved (display of wrong values when another unit than the base unit was used, e.g. mg/l instead of % at oxygen).

    Since we made huge changes we decided to work in 2 steps:

    1. 5.13 includes all changes regarding the level control, the software for flow sensors and level cards is prepared but not activated yet

    2. after a successful beta-test of 5.13 the support for flow sensors and level-cards will be activated, this will be a new version 5.14

    When the test goes as expected we can publish 5.14 at the beginning of next week - then the owners of flow-sensors can finally use them


    From now on firmware 5.13 BETA and ProfiLuxControl 5.1.3.0 BETA are available for download, as well as the new programmers guide 5.13 - especially the topics "level" and "settings switch outputs" are of interest


    Important: Save all settings and sensor data of your ProfiLux before you perform the update!


    Many thanks to all our testers in advance!
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  2. #2
    Registriert seit
    30.05.2011
    Beiträge
    44

    Standard

    Marinemad apps is not able to control ghl with error "profilux already in manual override mode"

  3. #3
    Registriert seit
    18.02.2009
    Ort
    Kaiserslautern
    Beiträge
    7.631

    Standard

    the manual override control has been reprogrammed due to adding more security when the connection fails a few versions ago, this is nothing special of this BETA

    MarineMad stopped developing the app, this means that the app becomes more and more incompatible with new or changed functions and features in ProfiLux

    I assume other than that there are no problems, which are caused by obvious firmware bugs, right?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Registriert seit
    30.05.2011
    Beiträge
    44

    Standard

    Thx for update, actually I have my 5.11 working fine just before, could you try to fix it in coming version ?

  5. #5
    Registriert seit
    06.02.2012
    Beiträge
    2.020

    Standard

    could you try to fix it in coming version
    There is nothing to fix. As Matthias said: The marinemad app is outdated and does not support the last improvements of the firmware.

    Due it´s a third party party app and not in responsibility of GHL, there are only two options for you if you want to use it further:
    • Stay at firmware 5.11 and perform no updates anymore
    • Contact the guys from marinemad to change their mind and develop the app further


    Stop of the further development only to keep that [zombie] app alive is not an option

  6. #6
    Registriert seit
    08.04.2009
    Beiträge
    265

    Standard

    I assume other than that there are no problems, which are caused by obvious firmware bugs, right?
    Matthias, have not had time to update to the new firmware yet , however in the new firmware can we disable the level control when doing water changers?

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •