Results 1 to 6 of 6

Thread: PropellerBreeze dimentions with mount and connection

  1. #1
    Join Date
    26.05.2010
    Posts
    46

    Default PropellerBreeze dimentions with mount and connection

    Hi All,

    I would like to know if possible which total width dimension have the 3 types of PropellerBreezs with the mounts installed.
    Is it possible to connect the propeller controller and a simu/sunrise spot via Y splitter on the same L port i.e. both connected to L3L4.

    Regards
    Pedro

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    dimension: see our website

    http://www.aquariumcomputer.com/Syst..._technics.html

    splitter: with Sunrise yes, with Simu no (because it needs 2 channels)
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    26.05.2010
    Posts
    46

    Default

    Hi Matthias,

    I have the dimensions of the normal module, but, what I looking for is the dimensions with the two side "nuts" of the mounting brackets installed, i.e. let's say the module has 30 cm without the brackets and with the brackets has 36cm. Those are the dimensions that I'm looking for.
    Thanks
    Pedro

  4. #4
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    we check this tomorrow
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  5. #5
    Join Date
    26.05.2010
    Posts
    46

    Default

    Matthias,

    Thank you very much for your assistance I will wait for your reply.

    Regards
    Pedro

  6. #6
    Join Date
    18.05.2011
    Location
    Kaiserslautern, Germany
    Posts
    139

    Default

    Hello,
    here the size you asked for:

    PropellerBreeze3: 358 mm
    PropellerBreeze4: 450 mm
    PropellerBreeze5: 542 mm
    GHL Store
    www.ghl-store.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •