Results 1 to 4 of 4

Thread: 1-10v adjustment

  1. #1
    Join Date
    25.03.2012
    Location
    saskatoon
    Posts
    19

    Default 1-10v adjustment

    is there a way to get the lower voltage to adjust above 4 on a profilux 3ex? i need a range of about 6-7 to 10? thanks for any help.

  2. #2
    Join Date
    07.06.2009
    Posts
    738

    Default

    in plc
    in 1-10v interface select one and click edit.

    basic stuff => read your manual , is my advice

  3. #3
    Join Date
    25.03.2012
    Location
    saskatoon
    Posts
    19

    Default

    i read it thanks for the advice but i think you misread my post. i need to raise the min value above 4vdc which section 6.4 of the programming manual states that 0-4v is the min range.. the sweet spot i need to drive my fets that are controlling my LED's is 6vdc - 10 vdc.

  4. #4
    Join Date
    07.06.2009
    Posts
    738

    Default

    ach k,
    idd I only use it for min 2,5V but not higher then 4V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •