Results 1 to 6 of 6

Thread: Connecting Meanwell Elan60-48D to Profilux 3

  1. #1
    Join Date
    12.08.2009
    Posts
    27

    Default Connecting Meanwell Elan60-48D to Profilux 3

    How can I connect 4 Meanwell 60-48D (dimmable) led drivers to Profilux 3.
    Specifically:
    1. How do I connect the dimming wires to the L ports?
    2. Do I need to connect the drivers main power supply to switched ports on Profilux?
    3. How many of these drivers can I connect to one L port?

    These questions may have been answered before but I am still a little confused and would appreciate clarifications.

    Thanks,

  2. #2
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    You can connect 1-10V directly to PL here are the Information to coonect with the right pins.
    Page2
    Control line from
    aquarium computer
    6 5 4 3 2 1
    You can connect 2 drivers/L-Port

    Pin1 = PL-Dimming 1 + to 1st driver 1-10V+
    Pin3= GND or 1-10V - for both drivers
    Pin5 = PL-Dimming 2 + to 2nd driver 1-10V+
    Last edited by PIWAWT; 19.02.2012 at 21:08.

  3. #3
    Join Date
    12.08.2009
    Posts
    27

    Default

    Thank you, now it is clear.

    How many PNL60-48D can I connect to each dimming channel?
    Last edited by ivolach; 20.02.2012 at 15:10.

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    I'm not sure but I think the L-ports operate at 10 or 20 mA. I did not found Informations about this problem on the Meanwell Webpage. I would max. 1 driver per port dimmable take. Another thing is, you have no power off function.
    Last edited by PIWAWT; 20.02.2012 at 22:11.

  5. #5
    Join Date
    12.08.2009
    Posts
    27

    Default

    Thank you.

  6. #6
    Join Date
    07.06.2009
    Posts
    738

    Default

    its idd around 2 per port , 3 would be pushing it ( if you search on the forum you will find it )

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •