Results 1 to 3 of 3

Thread: Dosing pump Calibration

  1. #1
    Join Date
    23.02.2009
    Posts
    44

    Default Dosing pump Calibration

    This maybe a silly question but I have to ask.

    I found the set up of the dosing pumps very straight forward. I was amazed at how simple it was.

    But the one thing I wanted to make sure of is the calibration steps

    This is how I calibrated my pumps.

    I first got a graduated cylinder and ran the pump manually for 1 minute. Let it rest for 1+ minutes and ran the pump again. And then 1 final time
    from there I took how much liquid was in my cylinder and divided by 3. in my case I got 43ml
    I then changed the default 60ml/min to 43ml/min
    and repeated the steps for my remaining pumps

    J

  2. #2
    Join Date
    18.02.2009
    Location
    Kaiserslautern
    Posts
    7,710

    Default

    this is absolutely correct!

  3. #3
    Join Date
    23.02.2009
    Posts
    44

    Default

    Thank you


    Danke

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •