it is easy u will do it
it is easy u will do it
Hi Blue,
If checked the cable and connection between PFLX and router. Seems ok, because i´ve taken out cable from PFLX and light on the router goes down and vise versa. so i assume the router knows there is a cable connection. Next i´ve added the following text in PLC
IP: the full number of the IP of the router which i obtained from the WEB because it was not mentioned on the router
IP: full address as provided by internet check
mask 255.255.255.255.0
gateway: again same as filled IP above
DNS: again same as filled IP above
saved, loaded etc.
Went to email notification: in Proflux, filled the whole thing out again and made sure that the mail domainserver was set: both smtp.upcmail.nl or mail.upcmail.nl do not work or make a difference. tested either with and without authentication.
Went back to LAN config and changed last entry of gateway and DNS e.g. as:
IP: full address as provided by internet check
mask 255.255.255.255.0
gateway: again same as filled IP above however last numbers x.x.x.10
DNS: again same as filled IP above however last numbers x.x.x.10
this did not at all. conclusion:
The email will only be sent out if USB is connected to the notebook. Once disconnected it stops sending emails to a requested email address which i would like to use for accosionnal checks. Could you please help!
double text line entered
Last edited by Franklin; 15.11.2011 at 09:56.
Hi Franklin i don't know u eamil domainserver but if they work thrue usb they are ok ..
i think that u have fill the wrong box they are 2 email emaily thrue profilux and one thrue pc u must configure the one thrue profilux
oh one last thing can u conect the profilux with ur laptop thrue ethernet ????? ( i ask just in case it goes somethig wrong with the settings
this is what i've got now, any good?
Last edited by Franklin; 15.11.2011 at 09:55.
In the screen u wrote as messege p3 update ( it write on ur the right of the screen profilux ) it is there u must enter the messege with ( the wired signs ) there is the settings that saved in pro .
But i don't know ur emails domain or the port thats why i made an email account in thr ones that ghl said it tested
( my opinion google ur mail company and found the port u need and its domain
Tapatalk
your message is difficult to read: In the screen u wrote as messege p3 update ( it write on ur the right of the screen profilux ) it is there u must enter the messege with ( the wired signs ) there is the settings that saved in pro . But i don't know ur emails domain or the port thats why i made an email account in thr ones that ghl said it tested
( my opinion google ur mail company and found the port u need and its domain
Can you rephrase above
I said that u configure 2 mail ( in profilux and in pc ) no need to for that , just fill the profilux settings
But i dont know ur email provider the port it ask ( u have let it 25 google it to learn the corect one )
Bookmarks