Simu-l & ledcontrol4active together?

[dnovanl]

Hello

I'm trying to work out how to get both devices running.

My main setup is a p3 ex (with 2 x plm4-l addon)
4 x t5 2f2d 80 W
1 x Simu l
1 x ledcontrol4 active (blue, red and white. one channel unused)

What i've been reading sofar is that you have to use L1/L2 and/or L3/L4.

Is there someone who know if it's possible to run both without using y splitter.

[Wirus]

Where´s the problem? You can use any L-port for any of the lamps.

Only restricted point is the ability to flash. Flashes with the Simu-L and also the LEDControl4Active are only possible, if they are connected to one of the internal L-Ports of the PL. So for your PL3 ex you can use L1L2, L3L4 or L5L6 for that.

BTW: Also the LEDControl4Active is restricted about flashing: Only channels 1+2 are able to flash, so you should connect white and blue there and red on channel 3 or 4

[dnovanl]

thank you for the info.

Now i have another thing, i connected the LedControl4Active to L1/L2 & L2/L3. i've got blue, red en 2 x white leds.
In the profilux setup there is a function so switch between channel 1+2 or only channel 1.
Is t possible to have 2 different flashes?

[Wirus]

Is t possible to have 2 different flashes?

Yes.