Results 1 to 3 of 3

Thread: how do i program the 4 ways analogue power bar?

  1. #1
    Join Date
    07.05.2009
    Posts
    8

    Default how do i program the 4 ways analogue power bar?

    here's what i got.
    i have 1 digi 6 powerbar and 4 dosers unit.
    they connected to s1-4.
    socket 1-4 is the dosers unit.
    socket 5-10 is the digi powerbar.
    now i plug the analogue 4 ways into s5-8.
    it seem pick up the programs i set for digi powerbar.(scoket 5-8)
    i cant find any manual for the analogue powerbar.
    thanks

  2. #2
    Join Date
    19.02.2009
    Posts
    2,976

    Default

    The 4-socket powerbar must always have the numbers given by the S-port (here 5-8).
    The numbers of the 6-socket powerbar can be selected freely.
    Please assign number 9-14 to the 6-socket powerbar, then it will work without an overlapping of the sockets.

  3. #3
    Join Date
    07.05.2009
    Posts
    8

    Default

    thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •