PAB Power bar

[GazzMan]

I have had a sparkie in over the week end doing my electrics, now he obviously has to turn the power off, on return of the power im getting a "PABCOM" warning on my Profilux 3ex, so i have to go into settings and reassign the pab bar.

shouldn't the profilux just restart on power up


Gazz

[GazzMan]

unfortunately, this is still happening, i have upgraded the firmware to the latest but after a power outage, i still have to go into settings and reassign the pab bar, when i get there, there is an X in the box but the plug bar is dead until i reassign it

Any help please guys


Gazz

[GazzMan]

bosh

[almost]

You mean that when power goes out you see "PABCOM" message on the display and when power comes back the message is still on?

In mine, when power comes back, the message is gone.

From the manual: "You have to select always all PAB devices also if they have already been assigned once before."

Do you select all PAB devices and reassign or only the Powerbar?

[GazzMan]

You mean that when power goes out you see "PABCOM" message on the display and when power comes back the message is still on?

In mine, when power comes back, the message is gone.

From the manual: "You have to select always all PAB devices also if they have already been assigned once before."

Do you select all PAB devices and reassign or only the Powerbar?

no, because when the power goes off you cant see anything (because the power is off), its when the power comes back on,im getting a PABCOM warning on the display the ghl is supposed to hold settings, but it turns the pab bar off and i have to reassign it in settings

[GazzMan]

do i have the right forum for GHL support, or should i be posting this ongoing problem somewhere else please, if im in the wrong place, could someone point me in the right direction

Many Thanks
Gazz

[BigAl07]

Gazz I think many people are away from their computers right now due to holiday travels and time off from work etc. I've looked and PAB questions are posted in this forum, in the Misc forum and several other places. I don't think the PAB has a specific place (that I can determine anyway) so I'd say this is probably as good a place as any.

Hopefully someone will drop in and be able to help.

Allen

[GazzMan]

ok bigal07, thank you for your reply mate, ill hang on fo a bit lol


Gazz

[BigAl07]

No problem. If someone doesn't offer any help soon I'll email someone and ask them to give it a look to see what is happening.

Good luck buddy.
Allen

[GazzMan]

ttt