My new project.....

[LOLLO77]

IMG_0037.jpgIMG_0040.jpg

Sorry for my English ...

I am going to set up an aquarium of 500 liters, 200 liters of refugium, sump 100 liters, 10 liters tank mangroves

technical equipment

riffkeramik
pump lifts NJ4500
LGM skimmer 850sp
N 2 Tunze 6095
N 1 Tunze Wavebox
N 1 VorTech mp10 for refugium
CO2 cylinder 14 liter
reactor built by me
80 kg live sand (DSB)
N 2 oscimotion constructed by me
# 1 250W HQI
N 2 CANNON 100W LED
N 2 ROYAL BLUE LED BAR
N 1 LED MOON
N 4 dosing pumps
N 1 WEB CAM
GHL Profilux EX 3
MONITOUR TOUCHSCREAM


YOU HAVE TO HELP ME TO THE MATERIAL Segl GHL

[LOLLO77]

help me to components
GHL 001.jpg

[richard.mayo]

I don't think the dosing pumps are PAB, you need to use a S port

[LOLLO77]

ok thanks

but with the power vents can do it, and finally connect the touch scream

[LOLLO77]

dimmer Power Supply 0 - 10V
What should I use?

[Wirus]

dimmer Power Supply 0 - 10V
What should I use?

Any that fits the lamp requirements. There are no details given, so it´s not possible to select a driver. I suggest to ask the lamp supplier for his recommendation.

Hint: Due 1-10V doesn´t switch off completely, you need a switched socket or a EVG-AP-2F-HIC to switch off the lamps completely

[LOLLO77]

hello
thanks for the answer
I have to connect a Mean Well ELN-60-48D, or Mean Well ELN-60-48P
what to use?

[Wirus]

what to use?

The D type is for dimming 1-10V, so it´s ok.
And again: No idea about the driver itself due you gave no infos about lamp requirements.

[LOLLO77]

Remote Dimmable 100 watt LED Driver

Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 93%
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potential meter
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistor)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.10)