Results 1 to 9 of 9

Thread: My new project.....

  1. #1
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Lächeln My new project.....

    IMG_0037.jpgIMG_0040.jpg

    Sorry for my English ...

    I am going to set up an aquarium of 500 liters, 200 liters of refugium, sump 100 liters, 10 liters tank mangroves

    technical equipment

    riffkeramik
    pump lifts NJ4500
    LGM skimmer 850sp
    N 2 Tunze 6095
    N 1 Tunze Wavebox
    N 1 VorTech mp10 for refugium
    CO2 cylinder 14 liter
    reactor built by me
    80 kg live sand (DSB)
    N 2 oscimotion constructed by me
    # 1 250W HQI
    N 2 CANNON 100W LED
    N 2 ROYAL BLUE LED BAR
    N 1 LED MOON
    N 4 dosing pumps
    N 1 WEB CAM
    GHL Profilux EX 3
    MONITOUR TOUCHSCREAM


    YOU HAVE TO HELP ME TO THE MATERIAL Segl GHL
    Last edited by LOLLO77; 21.10.2011 at 17:18.

  2. #2
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Default

    help me to components
    GHL 001.jpg

  3. #3
    Join Date
    12.05.2010
    Posts
    343

    Default

    I don't think the dosing pumps are PAB, you need to use a S port

  4. #4
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Default

    ok thanks

    but with the power vents can do it, and finally connect the touch scream

  5. #5
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Default

    dimmer Power Supply 0 - 10V
    What should I use?

  6. #6
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    dimmer Power Supply 0 - 10V
    What should I use?
    Any that fits the lamp requirements. There are no details given, so it´s not possible to select a driver. I suggest to ask the lamp supplier for his recommendation.

    Hint: Due 1-10V doesn´t switch off completely, you need a switched socket or a EVG-AP-2F-HIC to switch off the lamps completely

  7. #7
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Default

    hello
    thanks for the answer
    I have to connect a Mean Well ELN-60-48D, or Mean Well ELN-60-48P
    what to use?

  8. #8
    Join Date
    09.07.2010
    Location
    Aschaffenburg
    Posts
    987

    Default

    what to use?
    The D type is for dimming 1-10V, so it´s ok.
    And again: No idea about the driver itself due you gave no infos about lamp requirements.

  9. #9
    Join Date
    19.10.2011
    Location
    PARMA ( ITALIA )
    Posts
    11

    Default

    Remote Dimmable 100 watt LED Driver

    Features :
    Universal AC input / Full range (up to 305VAC)
    Built-in active PFC function
    High efficiency up to 93%
    Protections: Short circuit / Overload / Over voltage / Over temperature
    Cooling by free air convection
    OCP point adjustable through output cable or internal potential meter
    IP67 / IP65 design for indoor or outdoor installations
    Three in one dimming function (1~10Vdc or PWM signal or resistor)
    Suitable for LED lighting and street lighting applications
    Compliance to worldwide safety regulations for lighting
    Suitable for dry / damp / wet locations
    5 years warranty (Note.10)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •